Front Bumper Mask

Smart Car Bumper Mask Installation Instructions:

Install your new  Front Bumper Mask

I. Prepare the Car to accept the FRONT BUMPER MASK:

Step#1: Clean the bumper and surfaces under the car and the fender wells with soap and water..

Step#2: Place three (3) 3M Dual Lock strips on each of the fender liners and on the bottom cowling as shown in Figures #1 & #2.  Important  note: Clean these surfaces, and use the 3M 94 primer to ensure good adhesion of the 3M strips

II. Install the FRONT BUMPER MASK

Step #1: Attach the  Velcro end of the FBM to the inside of the fender aligning the top end of the FBM with the uppermost  3M strip.  Continue to place the FBM inside the fender  attaching the  edge of the FBM to the other two 3M strips.

Stretch the FBM across the front of the bumper allowing the bottom edge of the FBM to go under the bumper. Note: do not attach the top of the mask at this time.  (the top has the four (4 plastic retainer clips)  Now attach the other end of the FBM to the inside of the fender as before.

Step #2: Pull the bottom of the mask under the front bumper and attach each of the three small pieces of Velcro matching up with the 3M strips that you installed on the bottom of the car.

Step #3: Remove the hood and anchor the top of the mask on the bumper inside the compartment with the four plastic clips as shown in figure #3:

II. Removing the FRONT BUMPER MASK

The mask can be removed by releasing each of the two hood locks and removing the top portion of the mask. Then remove the mask from the inside of the fender wells. Note the hood locks can be accessed  with the mask in place using your thumbs to locate and  release the lock. See figure #4

Care of your bumper mask: The mask may be cleaned using a mild detergent  (no bleach). You may hand or machine wash (use a laundry bag when machine washing). Use a concentrated soap solution on areas of the mask that may be particularly dirty. Allow the material to air dry. Always make sure the front of the car is clean and free of sand and grit before installing the Bumper Mask. For the best life do not leave the mask on the car for extended periods.

Front Bumper Mask  - $99.99